Norgren Filter/Regulators Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
See Section ALE-24 for Accessories
Littleton, CO USA Phone 303-794-2611 www.norgren.com
B07
Compact design
Full flow gauge ports
Low torque, non-rising adjusting knob
Snap action knob locks pressure setting when
pushed in
Standard relieving models allow reduction of outlet
pressure even when the system is dead-ended
Protects air operated devices by removing liquid and
solids contaminants
Screw-on bowl reduces maintenance time
Can be disassembled without the use of tools or
removal from the air line
Series 07 General Purpose Filter/Regulator
1/8" and 1/4" Port Sizes
ALE-12-2
ISO Symbols
Automatic Drain
Relieving
Manual Drain
Relieving
Automatic Drain
Non Relieving
Manual Drain
Non Relieving
Alternative Models
-
-
0
B 7
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Drain Substitute
Automatic A
Manual M
Port Size Substitute
1/8" 1
1/4" 2
Element Substitute
5 µm 1
Bowl Relief Type Gauge Substitute
Transparent Relieving Without 01
Transparent Relieving With 02
Transparent Non-relieving Without 03
Transparent Non-relieving With 23
Metal Relieving Without 33
Metal Relieving With 34
Metal Non-relieving Without 35
Metal Non-relieving With 36
Outlet Pressure Adjustment Ranges* Substitute
1 to 10 psig (0.1 to 0.7 bar) A
5 to 50 psig (0.3 to 3.5 bar) E
5 to 100 psig (0.3 to 7 bar) K
5 to 125 psig (0.3 to 8.6 bar) L
Ordering Information. Models listed include PTF threads, transparent bowl, relieving diaphragm, gauge, automatic drain, 5 µm element, 5 to
100 psig (0.3 to 7 bar) outlet pressure adjustment range* .
Port Size Model Number Flow† scfm (dm
3
/s) Weight lbs (kg)
1/8" B07-102-A1KA 13 (6.2 dm
3
/s) 0.57 (0.26)
1/4" B07-202-A1KA 14 (6.5 dm
3
/s) 0.57 (0.26)
* Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified
ranges.
Typical flow with 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a 15 psig (1 bar) droop from set.
Seitenansicht 1
1 2 3 4 5 6 7 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare