Norgren Flow Controls Bedienungsanleitung PDF herunterladen (Seite 29)

Littleton, CO USA Phone 303-794-2611 www.norgren.com

FIT-3-29

Function Fittings and Flow Controls

Dimensions in Inches (mm)

mm O.D. tube x ISO G Banjo Bolt

Pressure Sensor Fitting- 102GD

This sensor fitting produces an end of stroke signal when exhaust back pressure in a cylinder

decays below a set value. It should be mounted directly on the cylinder and can be used with a

flow control device mounted into the top port.

It is recommended that the sensor supply pressure to port 1 be the same as the nominal working

pressure of the cylinder.

J 13.220

D BSPP

ØG

Inch O.D. tube x NPTF Banjo Bolt

Pressure Sensor Fitting- 124GD

This sensor fitting produces an end of stroke signal when exhaust back pressure in a

cylinder decays below a set value. It should be mounted directly on the cylinder and

can be used with a flow control device mounted into the top port.

It is recommended that the sensor supply pressure to port 1 be the same as the

nominal working pressure of the cylinder.

J 13.220

D BSPP

ØG

AB E

Product Tube

NPT

NPT J

Number O/D Thread C D Thread F G H I A/F

12 4GD 0218 5/32" 1⁄8

0.35 1.77

1⁄8

0.39 0.39 0.83 1.12

9/16''

(9) (45) (10) (10) (21) (29)

12 4GD 0228 5/32" 1⁄4

0.43 1.85

1⁄4

0.39 0.56 0.83 1.33

3/4''

(11) (47) (10) (14) (21) (34)

AB E

Product Tube

ISO G

ISO G J

Number O/D Thrd C D thread F G H I A/F

10 2GD 0418 41⁄8

0.35 1.77

1⁄8

0.39 0.24 0.83 0.98 0.59

(9) (45) (10) (6) (21) (25) (15)

10 2GD 0428 41⁄4

0.43 1.85

1⁄4

0.39 0.28 0.83 1.14 0.75

(11) (47) (10) (7) (21) (29) (19)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Norgren Flow Controls Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Norgren Flow Controls